Description - Echo DCS-2500T Operator's Manual

Description

1. Front hand guard - Guard between the front handle and
the saw chain for protecting the hand from injuries and
aiding in control of the chain saw if the hand slips off the
handle.
This guard is used to activate the chain brake which is to
stop the saw chain rotation.
2. Front handle (for the left hand) - Support handle locat-
ed at the left side of the motor housing.
3. Rear handle (for the right hand) - Support handle locat-
ed on the top of the motor housing.
4. Battery - LBP-560-100 only.
5. Sprocket cover - Protective cover to the guide bar, saw
chain and sprocket when the chain saw is in use.
6. Chain tension adjuster - Device to adjust chain tension.
7. Chain catcher - A projection designed to reduce the risk
of the operator's right hand from being hit by a chain
which has broken or derailed from the guide bar during
cutting.
8. Guide bar - The part that supports and guides the saw
chain.
9. Saw chain - Chain, serving as a cutting tool.
10. Oil tank
11. Oil tank cap - For closing the oil tank.
12. Type and serial number
13. Cover - The cooling air flow grill.
14. Hanging hook - This is the part for attaching the rope in
order to prevent the chain saw from dropping.
15. Lifting hook - If working off the ground the operator must
be trained in safe climbing techniques and use of all rec-
ommended safety equipment.
16. Oil adjusting screw - You can adjust discharge amount
of chain oil with the screw.
17. Trigger switch lockout - Locks trigger switch in the off
position until you have a proper grip with your right hand
around the handle.
18. Trigger switch - Activated by the operator's finger for
turning the motor on.
19. Power button - Press once to turn on power to the unit,
power indicator LED illuminates. Press once more to turn
power off to unit, power indicator LED turns off.
20. Power indicator LED - Remains illuminated when pow-
er to unit is turned on. Turns off when power to unit is off.
21. Tools - 13 x 19 mm T-wrench (combination screwdriver
/ spark plug socket).
22. Operator's manual - Included with unit.
Read before operation and keep for future reference to
learn proper, safe operating techniques.
23. Guide bar cover - Device for covering the guide bar and
saw chain during transport and other times when the
chain saw is not in use.
16