Bosch Professional GDR 180-LI Instruction Manual page 8

8 | English
a)
(3) Battery
a)
(4) Battery release button
(5) Rotational direction switch
(6) On/off switch
(7) "PowerLight" lamp
(8) Handle (insulated gripping surface)
(9) Screwdriver bit with ball catch
Technical Data
Cordless Impact Screwdriver
Article number
Rated voltage
A)
No-load speed
A)
Impact rate
A)
Max. torque , hard screwdriving application according to ISO 5393
– ¼" internal hexagon
– ■ ½"
Machine screw diameter
Tool holder
Weight according to EPTA-Procedure 01:2014
Recommended ambient temperature during charging
Permitted ambient temperature during operation
during storage
Recommended rechargeable batteries
Recommended chargers
A) measured at 20–25 °C with battery GBA 18V 4.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
Assembly
Remove the battery from the power tool before carry-
u
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
1 609 92A 713 | (21.11.2022)
(10) Universal bit holder
(11) Screwdriver bit
(12) Application tool (e.g. screw nut)
(13) Carbon brushes
(14) Cover cap
a) Accessories shown or described are not included with the
a)
V
-1
min
-1
min
Nm
Nm
mm
B)
kg
°C
C)
and °C
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
Do not continue to press the On/Off switch after the
u
power tool has automatically switched off. The battery
can be damaged.
Follow the instructions on correct disposal.
Removing the battery
The battery (3) is equipped with two locking levels to pre-
vent the battery from falling out when pushing the battery re-
lease button (4) unintentionally. As long as the battery is in-
serted in the power tool, it is held in position by means of a
spring.
a)
a)
product as standard. You can find the complete selection of
accessories in our accessories range.
GDR 180-LI
3 601 JG5 1..
18
0 – 2800
0 – 3600
160
–
M6–M14
¼" internal hexagon
1.7
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
a)
GDX 180-LI
3 601 JG5 2..
18
0 – 2800
0 – 3600
160
180
M6–M16
■ ½"
¼" internal hexagon
1.8
0 to +35
–20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
Bosch Power Tools