Advertisement
1. About Your Camcorder
1.2 Button Function Description
Function
Power
Mode
Menu
Zoom
Photo
Record
Display
LED Light Button
LED Light
Tripod Mount
Battery/Memory
Card Door
Speaker
Lens
Description
Press and hold for 3 seconds to power on, tap
once to power off.
Tap to cycle between Video, Photo, Playback,
Settings and Slide Show modes.
Tap to access and exit all menus and
submenus.
In Video and Photo: Press right to zoom-in.
Press left to zoom-out.
In Menu: Press to go to the previous or next
setting option.
In Playback: Press to go to the previous or next
video. While playing a video, press to increase
and decrease the volume.
In Photo: Press softly to focus the image. Press
hard to capture a photo.
In Playback: While playing a recorded video,
tap to pause and tap again to resume.
OK button in menus. Tap to confirm a setting.
In Video: Tap to start/stop recording video.
In Playback: Tap to stop a playing video.
In Photo and Video: Tap to turn off the icons on
the screen, tap again to turn the display off, tap
a third time to turn on the display with the icons.
In Video and Photo: Press to turn on the LED
Light.
LED light to aid with vision and recording in
darkness.
Mount port for attaching to a tripod nut.
Door to cover storage slot for inserting the
battery and a memory card.
Built-in speaker output for playback of video files
when audio recording is enabled.
Front capture device for all video and photo.
5
Advertisement
