Way Unit Controller Pcb; Removing The Inside Delivery Tray, Reversal Guide, And Inside Upper Cover; Removing The Right Cover (Rear); Removing The Right Door - Canon A1 Service Manual

Chapter 3
3) Disconnect the connector [1], and remove the 2
screws [2]; then, detach the No. 3 delivery solenoid
[3].
F-3-188

3.4.9 3 Way Unit Controller PCB

3.4.9.1 Removing the Inside
Delivery Tray,
Guide, and Inside Upper
Cover
1) Remove the inside delivery tray [1].
2) Remove the reversing guide [2].
3) Remove the screw [3], and detach the inside upper
cover [4].
F-3-189
3-42
Reversal
0007-6320
3.4.9.2 Removing the Right
Cover (rear)
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
[2]
[1]
F-3-190
3.4.9.3 Removing the Right
Door
1) Open the right door.
F-3-191
0007-6321
[3]
[3]
[3]
[4]
0007-9334