Duplexing Inlet Sensor; Removing The Reversal Sensor; Removing The Inside Delivery Tray, Reversal Guide, And Inside Upper Cover; Removing The Right Cover (Rear) - Canon A1 Service Manual

5) Remove the 2 screws [2], and close the extension
delivery kit.
F-3-155
6) Detach the extension delivery kit [1] from the host
machine.
F-3-156
3.4.3.5 Removing the Reversal
Sensor
1) Disconnect the connector [1], and detach the
reversal sensor [2].
F-3-157

3.4.4 Duplexing Inlet Sensor

3.4.4.1 Removing the Inside
Delivery
Guide, and Inside Upper
Cover
1) Remove the inside delivery tray [1].
2) Remove the reversing guide [2].
3) Remove the screw [3], and detach the inside upper
cover [4].
3.4.4.2 Removing the Right
Cover (rear)
1) Open the pedestal right door [1]. (if equipped with
a 2-Cassette Pedestal-Y2)
2) Open the right lower door [2].
0007-6220
3) Remove the 5 screws [3], and detach the right cover
(rear) [4].
Tray, Reversal
F-3-158
[4]
[2]
[1]
F-3-159
Chapter 3
0007-6221
0007-6223
[3]
[3]
[3]
3-35