Advertisement
Specifications
Model Number
WSB24
Standards
IEEE 802.11b
Ports
Two RP SMA and Two RP TNC connectors
Peak Gain
+14 dBm
Receiver Gain
+20 dBm (nominal)
Tx Input Power
+5 dBm (minimum) - +20 dBm (maximum)
LEDs
Power
Environmental
Dimensions
7.32 x 2.48 X 6.10 inches
(186 mm x 63 mm x 155 mm)
Unit Weight
1.87 lbs. (0.85 kg)
Power
5V DC - 2.5A. Consumes 600mA on TX
and 80mA on RX
Certifications
FCC
Operating Temp.
-40° C to 70° C (-40° F to 158° F)
Storage Temp.
-40° C to 120° C (-40° F to 248° F)
Operating Humidity
10% to 85% Non-Condensing
Storage Humidity
5% to 90% Non-Condensing
Package Contents
Instant Wireless
®
Wireless Signal Booster
• One Wireless Signal Booster
• Setup diagram (printed)
• Registration card
• Two RP SMA to RP TNC connection cables
• Power adapter
The Wireless Signal Booster is certified by the FCC for use with the Linksys
WAP11 Wireless Access Point or the Linksys BEFW11S4 Wireless Access Point
Router only. Use of the Wireless Signal Booster with any other products is
strictly prohibited by FCC regulations. Linksys expressly disclaims the implied
warranties of merchantability and fitness for a particular purpose for any
damages caused by misuse of the Wireless Signal Booster.
Specifications are subject to change without notice. Instant Wireless, Linksys, and the Linksys logo are registered trademarks of Linksys Group, Inc. Other brands and product names are trademarks or regis-
tered trademarks of their respective holders. Copyright © 2002 Linksys. All rights reserved.
DS-WSB24-012403A JL
Simple Installation
Step Four
Linksys
World Headquarters:
17401 Armstrong Ave.
Irvine, CA 92614 USA
E-mail:
sales@linksys.com
support@linksys.com
Web:
http://www.linksys.com
Linksys products are available in more than 50
countries, supported by 12 Linksys Regional
Offices throughout the world. For a complete
list of local Linksys Sales and Technical
Support contacts, visit our Worldwide Web Site
at www.linksys.com .
Step One
Step Two
Step
Three
Advertisement
