Printing Booklets - Lexmark Color Jetprinter Z42 User Manual

Printing booklets

Printing booklets
Printing booklets Printing booklets
1 1 1 1 Select the correct settings in your software application:
2 2 2 2 Open the Printer Properties. For help, see page 5.
3 3 3 3 Click the Job Finishing
4 4 4 4 Select Booklet
5 5 5 5 Select the number of Sheets Per Bundle
6 6 6 6 To receive paper reloading instructions, click Print
7 7 7 7 Click OK
You can print and bundle your document together to
make a booklet.
Step 1: Load the paper Step 1: Load the paper Step 1: Load the paper Step 1: Load the paper
Load up to 100 sheets of paper (depending on thickness)
against the right side of the sheet feeder. For help, see
page 2.
Step 2: Customize your Printer Properties Step 2: Customize your Printer Properties Step 2: Customize your Printer Properties Step 2: Customize your Printer Properties
a a a a Select Portrait Portrait page orientation.
Portrait Portrait
b b b b Select from these paper sizes:
• • • • Statement
• • • • Letter
• • • • A4
• • • • A5
Job Finishing tab. Job Finishing Job Finishing
Booklet.
Booklet Booklet
Notes:
• A bundle is any number of sheets of paper folded
together. For help, see page 17.
• When printing with a heavier paper stock, select a
smaller number of Sheets Per Bundle to allow for
binding considerations.
reloading instructions after the first side prints. reloading instructions after the first side prints reloading instructions after the first side prints reloading instructions after the first side prints
OK.
OK OK
Sheets Per Bundle Sheets Per Bundle. Sheets Per Bundle
Print
Print Print
Printing beyond the basics
•
•
15 15 15 15
•
•
•