Agilent Technologies 16452A Operation And Service Manual page 21

Reference
Designator
1
2
3
4
5
6
The O-rings are assembled in the 16452A.
1
The 1.3 mm spacer is assembled in the 16452A.
2
The cap is on the SMA-BNC adapter.
3
The carrying case and the
4
The xture stand is shown in Figure 2-2. Assemble it as shown in the gure.
5
The stand body is assembled using the two angle irons (16452-01201), and the four screws (0515-0914).
6
If you ordered a measurement cable (16048A, or 16452-61601), check that the cable is included.
All manuals and user guides at all-guides.com
Table 2-1. Contents
Description
1
4
5
Operation and Service Manual
Figure 2-2. Assembling the Fixture Stand
Part Number
2
3
6
are not shown in the Figure 2-1.
Quantity
4
Initial Inspection 2-3