Biostar B650EGTQ Manual page 25

BIOS Update Utility (through the Internet)
1. Installing BIOS Update Utility from the DVD Driver.
2. Please make sure the system is connected to the internet before using this function.
3. Launch BIOS Update Utility and click the
"Online Update" button on the main screen.
4. An open dialog will show up to request your
agreement to start the BIOS update. Click
"Yes" to start the online update procedure.
5. If there is a new BIOS version, the utility will
ask you to download it. Click "Yes" to proceed.
6. After the download is completed, you will be
asked to program (update) the BIOS or not.
Click "Yes" to proceed.
7. After the updating process is finished, you
will be asked you to reboot the system. Click
"OK" to reboot.
8. While the system boots up and the full screen logo shows up, press <DEL> key to enter BIOS
setup.
After entering the BIOS setup, please go to the <Save & Exit>, using the <Restore Defaults>
function to load Optimized Defaults, and select <Save Changes> and <Reset> to restart the
computer. Then, the BIOS Update is completed.
Chapter 3: UEFI BIOS & Software | 25
B650EGTQ