Laser Controls - Pittsburgh 93884 Owner's Manual & Safety Instructions

Horizontal and Vertical Vial Use
The Vials on the level can be read by observing
the bubble within. If the bubble is centered in
between the lines, then the Vial is level.

Laser Controls

1. Vertical Laser Button - This button turns on
the vertical laser line if the Slide Switch is in the
upper position. The vertical laser is blocked
while the Slide Switch is in the lower position.
2. Horizontal/Dot Laser Button - This button turns
on the horizontal laser line if the Slide Switch is
in the upper position. It can be used along with
the vertical laser line to make a cross. When the
Slide Switch is in the lower position, the laser is a
dot instead.
3. Slide Switch - The Slide Switch determines laser
operation.
WARNING! Point the end of the level away
from people's eyes when adjusting the Slide
Switch. If the Slide Switch is in the lower
position, it can conceal an illuminated laser
beam.
If the Slide Switch is in the upper position, the
Vertical Laser Button will project a vertical line
and the Horizontal/Dot Laser Button will project
a horizontal line. When the Slide Switch is in the
lower position, the Vertical Laser Button will be
covered and the Horizontal/Dot Laser Button will
project a simple dot beam.
WARNING! To conserve battery power and
prevent accidents, move the Slide Switch to
the upper position and verify that both lasers
are off after use.
Page 4 For technical questions, please call 1-888-866-5797.
Vertical Laser Button
Slide Switch
Horizontal / D ot Laser Button
Item 93884