Flash; Hearing Aid Compatibility; Illuminated Keypad; Intenna System - Cobra NavOne 2500 Operating Instructions Manual

Cobra electronics operating instructions cordless telephone cp-2500
Hide thumbs Also See for NavOne 2500:
Table of Contents

Advertisement

FLASH

This feature briefly interrupts the phone line so that you may access some of the
advanced featuresÑ like ÒCall WaitingÓ and ÒThree-Way CallingÓÑ that may be
offered at extra cost by your local telephone company. Press and release the
FLASH button on the handset to answer a second phone call or place a confer-
ence call if you subscribe to these services.

HEARING AID COMPATIBILITY

Your cordless telephone handset is compatible with inductively coupled
hearing aids (HAC).

ILLUMINATED KEYPAD

When the phone rings or you touch any button, the keypad automatically
lights up, making it easier to read and use, even in the darkest room or late at
night.
SYSTEM
The revolutionary, patented Intenna hidden-antenna system is a Cobra exclusive.
Intenna is the worldÕs first and only full-range-power cordless telephone that con-
ceals the handset and base antennas inside the phone and out of the way. No
more antennas to extend, bend or break. CobraÕs hidden antennas are perfectly
matched to your phoneÕs microprocessor circuitry for optimum performance
offering the ultimate in user-friendly convenience.

LAST NUMBER REDIAL

Each time you dial, the phone number youÕre calling is automatically saved
in a special REDIAL memory. To call that number again at a busy signal, press
FLASH (without hanging up) to get a new dial tone, then press and release
the REDIAL button. If you wish to try the call in a few minutes, use TALK to
access the dial tone, then press and release the REDIAL button. The number
will automatically be redialed.

MEMORY DIALING (STORAGE)

Your Cobra Intenna cordless phone enables you to store up to ten frequently
dialed phone numbers or emergency numbers. With the TALK button off,
press and release the MEMORY button ; enter the digits of the phone number
you wish to store, up to 16 digits; press and release the MEMORY button
again. Now assign your memory number a position by entering any keypad
number from 0 to 9. You will hear a confirmation beep. NOTE: for automated
banking or alternate long distance service, you may need to program a num-
ber which is longer than 16 digits. You will need to divide the number between
two memory I.D. numbers. Follow the steps above.
MEMORY + TELEPHONE + MEMORY + I.D. # = CONFIRMATION
NUMBER
(0Ð9)
10
TONE

Advertisement

Table of Contents
loading

This manual is also suitable for:

Intenna cp-2500

Table of Contents