Cobra CP-9125 Operating Instructions Manual

900 mhz cordless telephone

Advertisement

Quick Links

CP9125manual(6.12)
10/20/98 11:38 AM
Page 1
Cobra Electronics Corporation
6500 West Cortland Street
Chicago, IL60707
If You Think You Need Service
For te c h n i cal assistance, please call our Au to m a ted Help Desk which can assist
you by answe ring the most fre q u e n t ly asked questions about Co b ra prod u ct s.
(773) 889-3087
24 hours a day, 7 days a week.
A Consumer Service Representative can be reached through this same number
8:00 am - 8:00 pm,Monday through Friday, CST.
Technical assistance is also available on-line in the Frequently Asked Questions (FAQ)
section at www.cobraelec.com or by e-mail to productinfo@cobraelec.com
If you think you need service call 1.773.889.3087
"If your product should require factory service please call Cobra first before sending your unit in.
This will ensure the fastest turn-around time on your repair."
You may be asked to send your unit to the Cobra factory. It will be necessary to furnish the follow-
ing in order to have the product serviced and returned.
1. For Warranty Repair include some form of pr oof-of-purchase, such as a mechanical reproduction
or carbon or a sales receipt . If you send the original receipt it cannot be returned.
2. Send the entire product.
3. Enclose a description of what is happening with the unit. Include a typed or clearly print name
and address of where the unit is to be returned.
4. Pack unit securely to prevent damage in transit. If possible, use the original packing material.
5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First
Class Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,6500
W. Cortland St., Chicago, IL 60707.
6. If the unit is in warranty, upon receipt of your unit it will either be repaired or exchanged
depending on the model. Please allow approximately 3 to 4 weeks before contacting us for
status. If the unit is out of war ranty a letter will automatically be sent informing you of the
repair charge or replacement charge. If you have any questions, please call 1.773.889.3087 for
assistance.
Cobra Electronics Corp.© 1998
Printed in China
Part No. 480-282-P-001
CP-9125
O pe rating Instru ctions
for your Co b ra CP-9125
Private Call
900
®
900 MHz
Cordless
Telephone
"Ingenious Prod u cts for Easier Co m m u n i cat i o n ."
FCC Information
FCC Information
Included Accessories
Included Accessories
Re g i s te red with The FCC
1
Please note : This co rdless phone ope rates under part 15 and part 68 of FCC ru l e s.
O pe ration is subject to two co n d i t i o n s :
1 .It may not inte rfe re with radio co m m u n i cat i o n s, and 2.It must accept any inte rfe re n ce
re ce i ve d, including that which may cause undesirable ope rat i o n . See the Operational
Features section of this manual for ways to reduce interference.
Changes or mod i f i cations not ex p ressly approved by the party re s ponsible for co m p l i a n ce
could void the user's authori ty to ope rate this equipment.
N OT E :This equipment has been te s ted and found to comply with the limits for a Class B
digital dev i ce, p u r s u a nt to Pa rt 15 of the FCC Ru l e s.The limits are designed to provide re a-
2
sonable pro te ction against harmful inte rfe re n ce in a re s i d e ntial installat i o n .This equip-
m e nt generate s, uses and can ra d i ate radio fre q u e n cy energy and,if not installed and used
in acco rd a n ce with the instru ct i o n s, m ay cause harmful inte rfe re n ce to radio co m m u n i ca-
t i o n s. Howeve r, t h e re is no guara ntee that inte rfe re n ce will not occur in a particular installa-
t i o n . If this equipment does cause harmful inte rfe re n ce to radio or te l evision re ce p t i o n ,
which can be dete rmined by turning the equipment off and on,the user is enco u raged to
t ry to co rre ct the inte rfe re n ce by one of the fo l l owing measure s :
- Re o ri e nt or re l ocate the re ceiving ante n n a .
3
- Increase the separation be tween the equipment and re ce i ve r.
- Co n n e ct the equipment into an outlet on a circuit diffe re nt
f rom that to which the re ce i ver is co n n e cte d.
- Consult the dealer or an ex pe ri e n ced ra d i o / TV technician for help.
Your telephone co m p a ny is re q u i red by the Fe d e ral Co m m u n i cations Commission to allow
you to co n n e ct FCC re g i s te red telephones to their lines.
4
The FCC re q u i res you to provide info rm at i o n , if re q u e s ted by the local telephone co m p a ny,
a bout the co n n e ction of an FCC re g i s te red telephone to their lines. Th ey may ask you fo r
the FCC re g i s t ration number and ringer equiva l e n ce number (REN), both of which are on
the bo t tom of the base. Th ey may also ask for the Un i versal Se rv i ce Order Code (USOC)
n u m ber which is RJ-11C. It is illegal to use this phone on a party line or to
co n n e ct it to a co i n - o pe rated te l e p h o n e.
The REN is used to dete rmine the quant i ty of dev i ces you may co n n e ct to the te l e p h o n e
l i n e.Exce s s i ve RENs on the telephone line may result in the dev i ces not ringing in re s po n s e
5
to an incoming ca l l .In most areas the sum of RENs should not exceed 5.0.To be sure, co n-
t a ct the local telephone co m p a ny.
If your equipment causes harm to the telephone netwo rk ,the telephone co m p a ny will
notify you in adva n ce (if possible) of a te m po ra ry disco nt i n u a n ce of serv i ce.Al s o, you will
6
be advised of your ri g ht to file a co m p l a i nt with the FCC .
The telephone co m p a ny may make changes in it's facilities, e q u i p m e nt or proce d u res that
could affe ct the ope ration of your equipment.The telephone co m p a ny will prov i d e
7
a dva n ce notice to help you maintain uninte rru p ted serv i ce.
What's Included with Your CP-9125
1.
Headset
2.
AC/DC Power Adapter
3.
Memory Label
4.
Line Cords (6"and 6')
5.
Belt Clip
6.
Belt Clip Slot Cover
8
7.
Wall Mount Bracket
8.
Handset Battery
A1

Advertisement

Table of Contents
loading

Summary of Contents for Cobra CP-9125

  • Page 1 4. Pack unit securely to prevent damage in transit. If possible, use the original packing material. 5. Ship prepaid and insured by way of a traceable carrier such as United Parcel Service (UPS) or First Class Mail to avoid loss in transit to: Cobra Factory Service, Cobra Electronics Corporation,6500 W. Cortland St., Chicago, IL 60707.
  • Page 2: Controls & Indicators

    CP9125manual(6.12) 10/20/98 11:38 AM Page 4 Controls and Indicators Thank you for purchasing the Cobra CP-9125 cordless phone. Properly used, this Cobra prod- Base: uct will give you many years of reliable service. Line Jack Power In Jack Customer Support...
  • Page 3: Table Of Contents

    CP9125manual(6.12) 10/20/98 11:38 AM Page 7 How to Use Your Cobra CP-9125 900 MHz Cordless Telephone Contents Features of This Product Features...1 FCC Information/Included Accesories...A1 • Private Call ® Voice Scrambling - Controls & Indicators ...A2 Base and Handset Our Thanks to You ...A3 •...
  • Page 4: Important Safety Instructions

    CP9125manual(6.12) 10/20/98 11:38 AM Page 8 Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to per- 1 5 . sons, including the following: 1 6 .
  • Page 5: Installation

    CP9125manual(6.12) 10/20/98 11:38 AM Page 10 Installation Quick Set-Up Quick Set-Up Guide Guide Connect round connector into power jack on base. Note Install Ni-Cad battery in the handset. The battery must be charged at To remove the battery door, press and slide least 12 hours before use.
  • Page 6 CP9125manual(6.12) 10/20/98 11:38 AM Page 12 Installation Quick Set - Up Quick Set-Up Guide continued Guide Turn on RINGERswitch. Plug 6 ’ phone co rd into wall jack. Note Charge batteries for 12 hours before first use. Plug phone cord into jack on rear of base. Switch TONE/PULSE on base for proper operation.
  • Page 7: Wall Mounting Instructions

    CP9125manual(6.12) 10/20/98 11:38 AM Page 14 Installation Wall Mounting Wall Mounting Instructions Instructions Plug 6”phone cord into jack on rear of base. Th re a d co rd through slot in wall mount bra c ke t. Note If you do not have a wall mount, contact your local phone company for installation of phone line and wall mount.
  • Page 8: Answering Calls From The Handset

    CP9125manual(6.12) 10/20/98 11:38 AM Page 16 Operation Answering Calls Answering Calls From The Handset To answer a call while handset is in base: F r o mT he H a n d s e t To answer a call while handset is away from Pick up handset.
  • Page 9: Answering Calls From The Base

    CP9125manual(6.12) 10/20/98 11:38 AM Page 18 Operation Answering Calls Answering Calls From The Base To answer a call on the base, use the From The Base Speakerphone feature: Note In Use When answering a call,the LED will illuminate. It will be Push and release displayed on both the handset and the base during the dura-...
  • Page 10: Placing Calls From The Handset

    CP9125manual(6.12) 10/20/98 11:38 AM Page 20 Operation Placing Calls Placing Calls From The Ha n d s e t Placing Calls From The Ba s e From The Pick up handset: Handset Note If you have pulse phone service, use the button to change from pulse to tone dialing after dialing the number and receiving...
  • Page 11: Channel Selection

    Push and release FLASH button to interrupt the interference. phone line to access features such as: The CP-9125 will scan for and ad vance to a • Call Waiting clearer channel when you push and release the • Three Way Calling Channel button.
  • Page 12: Level Volume Control

    4 Level Volume 4 Level Volume Control Mute Control Your CP-9125 fe at u res a MUTE button on the base. While in a conversation: Your CP-9125 has a four le vel volume control on the side of the handset.
  • Page 13: Last Number Instant Redial

    CP9125manual(6.12) 10/20/98 11:38 AM Page 26 Operation Last Number Last Number Instant Redial Last Number Delayed Redial Instant Redial Each time you dial a number, that number is If steps 1,2 and 3 from the “Last Number Instant stored in the REDIAL memor y. Up to 32 digits can Redial”...
  • Page 14: Memory Number Storage

    CP9125manual(6.12) 10/20/98 11:38 AM Page 28 Operation Memory Number Memory Number Storage Storage The CP-9125 will store up to 10 frequently called numbers. Push and release There will be 2 double beeps. Memory Push and release button once. Assign memory position by en tering keypad number from 0 to 9.
  • Page 15: Memory Number Dialing

    CP9125manual(6.12) 10/20/98 11:38 AM Page 30 Operation Memory Number Memory Number Dialing To Find The Handset Dialing The handset can be located when it’s away from Access the line. the base. To locate the handset: Note Memory dialing from base uses same procedure as handset.
  • Page 16: Intercom Mode From The Handset

    Operation Intercom Mode Intercom Mode From The Handset Intercom Mode The From Base From The Your CP-9125 can serve as an intercom between Handset the base and the handset. To utilize this feature: Note Intercom may be initiated from either the handset or the base.
  • Page 17: Hold Button

    Hold Button On The Handset Push and release on hold or to prevent them from hearing you. To release HOLD push and release or pick up a branch phone, which will auto- matically disconnect the CP-9125. Operation Hold Button On The Base Note...
  • Page 18: Ringer Switch

    When set on OFF, no ring will sound. Tone/Pulse Tone/Pulse The CP-9125 can be used either as tone or pulse, depending upon your phone servic e. Low Bat heard every 30 seconds for 2 minutes. Return to base for recharging.
  • Page 19: Battery Saver

    CP9125manual(6.12) 10/20/98 11:38 AM Page 38 Operation Private Call ® Private Call ® Voice Scrambling Battery Saver Voice Scrambling ® Handset may, in OFF position, remain away from Private Call prevents other cordless phones or scanners from understanding your conversations. base for up to 14 days.
  • Page 20 Cobra for Note recycling. Wrap batteries carefully and mail Replacement batteries are postage prepaid to: Cobra Electronics Corpor- available direct from Cobra. ation,6500 W. Cortland Street, Chicago, Illinois See Accessories section on 60707, Attn: Battery Recycling.
  • Page 21: Headset Operation/Belt Clip/Slot Cover

    Clean handset contacts. 3. Put the slot cover in Plug the headset Use the belt clip for the slot and press into the CP-9125 convenience. down. handset. Spread Right Page Operation Cleaning The C h a r g i n gC o n t a c t s...
  • Page 22: Troubleshooting

    CP9125manual(6.12) 10/20/98 11:39 AM Page 44 Troubleshooting Phone is dead 1. How long should the handset battery b e Are power adapter and phone cord connec ted? charged? Typically leaving the handset on the base Handset beeps during call or away from base overnight will charge the battery sufficiently.
  • Page 23 CP9125manual(6.12) 10/20/98 11:39 AM Page 46 Frequently Asked Questions 4. Why do I sometimes have difficulty making a 5. Why do I have static on my cordless phone? connection even though I’m close to the base? Your cordless phone works as a miniature radio There are several possible causes for this condi - transmitter and receiver.
  • Page 24: Limited One-Year Warranty

    Page 48 Frequently Asked Questions 6. Will more than one cordless phone work in Cobra warrants that its cordless telephone pr oducts, and the component parts thereof, will be free from defects in the house? workmanship and materials for a period of one (1) year Whether or not you are able to use t wo or more from the date of first consumer purchase.
  • Page 25 CP9125manual(6.12) 10/20/98 11:39 AM Page 50 Accessory Order Form Accessories Part # Description Cost Ea. Qty. Amount N i c ke l - Cadmium Bat te ry Pack w/Co n n e cto r $15.00 2 1 3 - 0 2 1 - N - 0 0 1 AC Power Ad a p te r $15.00 76 8 - 032 - N - 0 0 1...

This manual is also suitable for:

Privatr call 900 cp-9125

Table of Contents