Advertisement
In complying with YORK's policy for continuous prod-
uct improvement, the information contained in this
document is subject to change without notice. While
YORK makes no commitment to update or provide
current information automatically to the manual owner,
that information, if applicable, can be obtained by con-
tacting the nearest YORK Engineered Systems Group
office.
CONCRETE BASES
INSTALLATION – OM SYSTEMS
EFFECTS OF MOISTURE IN REFRIGERANT SYSTEMS
VACUUM DEHYDRATION
CENTRIFUGAL COMPRESSOR COUPLING ALIGNMENT
M
2
Multistage Compressor
YORK INTERNATIONAL
CHANGEABILITY OF THIS DOCUMENT
REFERENCE INSTRUCTIONS
DESCRIPTION
NOMENCLATURE
38
A
Impeller O.D.
Designation
Nominal Casing I.D.
No. of Stages
It is the responsibility of operating/service personnel
as to the applicability of these documents to the equip-
ment in question. If there is any question in the mind
of operating/service personnel as to the applicability
of these documents, then, prior to working on the equip-
ment, they should verify with the owner whether the
equipment has been modified and if current literature
is available.
–
7
–
First Stage
Impeller
Width Designation
FORM 220.11-NM2 (602)
FORM NO.
160.71-N1.1
160.71-N1
55.60-NM10
55.60-NM12
160.71-N2
D
–
Diffuser
Enhancement
Additional Stage
Information
3
Advertisement
