Assigning Luma-Net And/Or Dmx512 Channels; Assigning Numbers Automatically - Leviton DMX-512 Installation And Operating Manual

Leviton MDS Dimmer Cabinets with Luma-Net Control
Once you have reached the module you wish to change:
Press the Select/Save button.
1
The number stops flashing, and the module type starts flashing.
With the type flashing, press the DOWN
2
shows Function = Dimmer.
Press the Select/Save button.
3
Dimmer flashes.
Press the UP
4
Press the Select/Save button to select the desired function.
5
The flashing moves from Function to several choices of dimmer types.
Press the UP
6
Press the Select/Save button.
7
Press the UP
8
or press the Cancel/Clear button three times slowly to return to the to-
level menu.

Assigning Luma-Net and/or DMX512 Channels

The digital control board can assign dimming channels to various Luma-Net and/
or DMX512 control channels within the software; no wiring changes are
necessary.

Assigning Numbers Automatically

For a simple configuration, the first control channel number is defined as a
system-wide address (the factory default is 0001), and the system automatically
assigns the control channel numbers in numerical order to the dimming zones
(dimmers) within the dimmer cabinet. If a second dimmer cabinet is connected,
its system-wide address can be set (to 0019, for example), and the dimming
zones (dimmers) are assigned beginning with that number.
To change the system-wide addresses:
Press the UP
1
Press the Select/Save button.
2
The LCD display shows Enter Setup Code = 9999.
Press the UP
3
actual setup code.
The unit is unlocked so changes can be made.
Press the Select/Save button.
4
The LCD display shows Setup Menu Setup Modules?.
Press the DOWN
5
SETUP LUMANET SETUP LUMANET
START ADD = 001 START ADD = 001
or press the DOWN
address.
SETUP DMX 512 SETUP DMX 512
START ADD = 001 START ADD = 001
Press the Select/Save button.
6
The flashing moves from the description to the number.
Installation and Operating Guide
or DOWN buttons to scan through the functions.
or DOWN buttons to select a dimmer type
button to move on to another channel,
button until the LCD display shows Menu Setup.
and DOWN buttons to change the 9999 to the
button once to set up the Luma-Net start address,
button twice to set up the DMX 512 start
button until the LCD display
Page 15 of 18
18