Description of the hardware
5.3 Connecting / wiring
Procedure
Step
Instructions
1
Press the clip of the terminal block upwards.
2
Pull the terminal out to the front.
3
Lift the terminal out of the guide rail of the de‐
vice.
5.3.4.10
Establishing a 3SK25 PROFINET interface connection
Configuration guidelines
You can find information about the installation guidelines in Chapter "Additional documentation
(Page 15)".
Requirements
PROFINET IO RJ45 connecting cable is available.
Note
Bending radii of the PN cables
The bending radii that are specified in the documentation of the connecting cable must be
complied with.
168
Figure
Equipment Manual, 07/2020, NEB926253002000/RS-AC/006
SIRIUS 3RK3 Modular Safety System