Installing Lens Attachment - Leupold THE OFFICIAL Owner's Handbook Manual

1. Turn the focus ring counterclockwise (when viewing though the eye-
piece) until it stops.
2. Turn the focus ring clockwise until the "10m" mark aligns with the indica-
tor mark on the bell of the scope.
3. From this point, all readings of the focus ring are in numerical order
when the ring is turned clockwise from the shooting position.
4. Adjust the ring as you would a standard adjustable objective model.
InSTALLInG A LEnS ATTACHMEnT
Many Leupold scopes offer threaded objective and eyepiece rings to allow
for the attachment of lens covers and a variety of Alumina ™ accessories.
These attachments thread directly into the objective or eyepiece rings. Turn
until
finger tight — do not over tighten.
28