Lenovo ThinkPad X60 1706 Supplementary Manual page 44

Installing a new operating system
6. Insert the CD for Windows 2000 into the CD or DVD drive, and restart
7. If you have not yet installed Windows 2000 Service Pack 4, visit the
8. Download Windows 2000 Service Pack 4 from the Web site. To install it,
9. Visit the Lenovo Web site at
10. Download Intel Matrix Storage Manager Driver from the Web site. To
11. Run Intel Matrix Storage Manager Driver. To do this, go to
12. Turn the computer off and then on again.
13. Start the BIOS Setup Utility menu.
14. Select Config.
15. Select Serial ATA (SATA).
16. Select AHCI.
17. Start Windows 2000. The Welcome to the Found New Hardware Wizard
18. Click Next.
19. Select Search for a suitable driver for my device (recommended), and
20. Select Specify a location, and then click Next.
21. Specify the path, C:\DRIVERS\WIN\SATA, and click OK. The Driver
22. Click Next. The Completing the Found New Hardware Wizard appears.
23. Click Finish.
24. When the System Settings Change window appears, click Yes. The
25. In the device listing on the Device Manager window, a yellow mark may
26. Restore C:\IBMTOOLS or C:\SWTOOLS from the backup copy you
36
®
ThinkPad X60 Series Service and Troubleshooting Guide
the computer. Follow the instructions on the screen.
Microsoft Web site at
http://www.microsoft.com/windows2000/downloads/servicepacks
follow the instructions in the readme file.
Note: If you install any anti-virus application before installing the service
pack, uninstall the anti-virus application. After installing the
service pack, re-install the anti-virus application.
http://www.lenovo.com/think/support/site.wss/TPAD-MATRIX.html
install it, follow the instructions for clean installation in the readme file.
C:\DRIVERS\WIN\SATA\PREPARE, and double-click install.cmd.
appears.
then click Next.
Files Search Results window appears.
computer restarts.
appear at the left side of the Universal Serial Bus (USB) controller. If it
does appear, open its properties and click the Reinstall driver button to
install the USB2.0 driver.
made before starting the installation.