ASROCK H610TM-ITX Manual page 28

B A
B A
B A
B
NUT2
26
20
o
NUT1
Step 3
Peel off the yellow protective film on
the nut A. Prepare the M.2 standoff
that comes with the package, and
hand tighten it into the nut A. Skip
Step 3 if your M.2 SSD module is
Type 2280.
Step 4
Align and gently insert the M.2 SSD
module into the M.2 slot. Please be
aware that the M.2 SSD module only
fits in one orientation.
Step 5
Tighten the screw with a
screwdriver to secure the
module into place. Please do
not overtighten the screw as
this might damage the module.