IBM ThinkPad R32 2658 Maintenance Manual page 46

Error Message
Code
0192 System
Security-IBM
Embedded
Security hardware
tamper detected.
0197 Invalid Remote
Change
Requested
0199 System
Security-IBM
Security password
retry count
exceeded
0200 Failure Fixed Disk
0210 Stuck key
0211 Keyboard error
0212 Keyboard
Controller Falied
0213 Keyboard locked
Unlock key switch
40
ThinkPad R32 Series
Meanings
Security chip ID
matching failed.
Reported when the
CRC of request
packet in EEPROM
Block #7 is wrong.
System
administrator
password retry
expired (if failed 3
times)
Fixed disk is not
working or not
configured properly.
Stuck key on
keyboard.
Keyboard not
working.
Keyboard Controller
Falied test. May
require replacing
keyboard controller.
Unlock the system
to proceed.
Comment or
Action
System Board
Recovery-
Users need to
send the
system back
to the service
centers.
1. Run IBM
BIOS Setup
Utility, and
then save
current setting
by pressing
F10.
2. System
Board.
Check to see
if fixed disk is
attached
properly. Run
setup. Find
out if the
fixed-disk type
is correctly
identified.
Run
interactive
tests of the
keyboard and
the auxiliary
input devices.
Run
interactive
tests of the
keyboard and
the auxiliary
input devices.
Run
interactive
tests of the
keyboard and
the auxiliary
input devices.
Run
interactive
tests of the
keyboard and
the auxiliary
input devices.