IBM ThinkPad R32 2658 Maintenance Manual page 214

2. In step 2, further pull out this latch before the system
board is attached to the lower case.
3. Thermal Pad must be replaced when either Heat Sink
Module, CPU or System Board is replaced. Thermal
Pad is stuck on the bottom side of Heat Sink Module
with adhesive. Do not re-use the thermal pad.
1260 I/O Port Bracket Disassembly
v "1010 Battery Disassembly" on page 183
v "1020 Mini-PCI cover and Mini-PCI card Disassembly"
on page 184
v "1040 Hard Disk Drive Disassembly" on page 186
v "1060 CD-ROM Disassembly" on page 187
v "1070 Keyboard Disassembly" on page 188
v "1100 Middle Cover Disassembly" on page 191
v "1110 CDC Cover Disassembly" on page 192
v "1170 LCD Disassembly" on page 197
v "1180 Keyboard bezel Disassembly" on page 198
v "1240 Speaker Disassembly" on page 205
v "1250 System Board Disassembly" on page 206
Step Size (Quantity)
1 M2.5 x L6
2 M2 x L12
208
ThinkPad R32 Series
1
Color
Silver
Silver
2
Torque
3.2 kgf-cm
1.6 kgf-cm