Majestic QUARTZPLA36IN Owner's Manual page 17

Figure 4.2 IPI Pilot Flame Patterns
NOTE: Appearance of rock jig, pilot shield and media tray
may vary between appliance models.
LED Replacement
Frequency: As needed
By: Qualified Service Technician
Tools needed: Protective gloves, replacement LED
assemblies
The LEDs installed in this appliance do not require any
annual service. If necessary, the LED assemblies can be
accessed for service or replacement.
To access:
• LED assemblies are accessible in the valve cavity.
To replace:
• Remove LED assemblies by removing two wing nuts
on each assembly.
• Install replacement LED assemblies and secure with
two wing nuts per assembly.
• See replacement parts list for LED part numbers.
Electrical Service and Repair
WARNING! Risk of Shock! Label all wires prior to dis-
connection when servicing controls. Wiring errors could
cause improper and dangerous operation. Verify proper
operation after servicing.
WARNING! Risk of Shock! Replace damaged wire with
type 105º C rated wire. Wire must have high temperature
insulation.
Majestic • QUARTZPLA36IN / QUARTZPLA36IL Owner's Manual • 2643-981 Rev. B • 7/22
17