4. Locate the memory slots on the system board. See "Locating parts on the
system board" on page 86.
5. Remove any parts and disconnect any cables that might prevent your access to
the memory slots.
6. Do one of the following:
v If you are replacing a memory module, open the retaining clips and remove
the old memory module that is currently installed.
Figure 12. Removing the memory module
v If you are installing a memory module, open the retaining clips of the
memory slot into which you want to install the memory module.
Figure 13. Opening the retaining clips of the memory slot
Chapter 8. Replacing FRUs - Tower computers
95