Lenovo ThinkCentre A62 3656 User Manual page 28

Figure 13. Removing the failing adapter card
3. Remove the new adapter card from its static-protective package.
4. Install the new adapter card into the appropriate slot on the system board.
20
User Guide
If you are replacing an adapter card, open the adapter card latch and remove
the failing adapter card.
Notes:
a. The adapter card fits tightly into the card slot. If necessary, alternate moving
each side of the adapter card a small amount until it is removed from the
adapter card slot.
b. If the adapter card is held in place by a retaining latch, press the adapter
card retaining latch 1 downwards to disengage the latch. Grasp the
adapter card and then gently pull the adapter card out of the slot.