Lenovo ThinkCentre A58e 3425 User Manual page 35

4. Remove the four screws that secure the hard disk drive. Then, slide the hard
disk drive out of the chassis.
Figure 19. Removing the hard disk drive
5. Slide the new hard disk drive into the hard disk drive bay and align the screw
holes in the new hard disk drive with the corresponding holes in the drive bay.
Then, install the four screws to secure the new hard disk drive in place.
Figure 20. Installing the hard disk drive
6. Connect the signal cable and the power cable to the rear of the new hard disk
drive. See "Connecting a SATA drive" on page 28.
Chapter 2. Installing or replacing hardware
27