Table of Contents
Advertisement
2. Lay the computer on its side for easier access to the system board.
3. Locate the memory slots on the system board. See "Locating parts on the
4. Remove any parts and disconnect any cables that might prevent your access to
5. If you are replacing a memory module, open the retaining clips and remove the
Figure 12. Removing the memory module
6. Open the retaining clips of the memory slot in which you want to install the
Figure 13. Opening the retaining clips
20
User Guide
system board" on page 10.
the memory slots.
old memory module that is currently installed. If you are installing a memory
module, go to step 6.
new memory module.
Advertisement
Table of Contents
