Removing And Replacing The Front Bezel - Lenovo ThinkCentre A55 8705 Hardware Replacement Manual

Removing and replacing the front bezel

To remove and replace the front bezel:
1. Remove the computer cover. See "Removing the computer cover" on page 7.
2. Remove the front bezel by releasing the three plastic tabs on the left side and
3. To reinstall the bezel, align the plastic tabs on the right side of the bezel with
4. Go to "Completing the installation" on page 26.
pivoting the bezel outward. Carefully set the bezel to the side without
disconnecting the power switch and LED assembly cable.
the corresponding holes in the chassis, then pivot it inward until it snaps into
position on the left side.
Chapter 2. Replacing hardware
9