Table of Contents
Advertisement
2. Pivot one of the drive bay latch handles toward the front of the computer and
then pivot the drive bay cage upward, as shown, until it is latched in the up
position. Repeat this procedure for the remaining drive bay.
3. Remove the support bar by pulling it outward from the computer.
4. Remove the adapter-slot-cover latch and the slot cover for the appropriate
expansion slot.
5. Remove the adapter from its static-protective package.
6. Install the adapter into the appropriate slot on the system board.
13
Chapter 1. Type 8316
Hide quick links:
Advertisement
Table of Contents
