Log - D-Link DIR-815 User Manual

DIR-815 AC1200 Wave 2 MU-MIMO Wi-Fi
Router with 3G/LTE Support and USB Port
User Manual

Log

On the System / Log page, you can set the system log options and configure sending the system
log to a remote host and/or a USB storage connected to the router.
To enable logging of the system events, go to the Settings tab and move the Enable switch to the
right. Then specify the needed parameters.
Figure 170. The System / Log page. The Settings tab.
Page 225 of 240
Configuring via Web-based Interface