Table of Contents
Advertisement
Troubleshooting
Problem:
No reception of WWVB time signal
Solution:
1) Wait overnight for signal.
2) Be sure indoor weather station is at least 6 feet
from any electrical devices, such as televisions,
computers, or other radio-controlled clocks.
3) Remove batteries for five minutes, reinsert and
leave alone without pressing buttons overnight.
4) If there are still problems, contact La Crosse
Technology
Hour is incorrect (minute and date are correct)
Problem:
Solution:
Be sure correct time zone and daylight saving time
are selected.
Problem:
The LCD is faint
Solution:
1) Set the LCD contrast to a higher number
2) Replace batteries
No remote temperature is displayed
Problem:
Solution:
1) Remove all batteries, reinsert into remote
sensor(s) first, then indoor weather station.
2) Place remote sensor(s) closer to indoor weather
station.
3) Be sure all batteries are fresh.
Problem:
Remote humidity displays "- -"
Solution:
1) A temperature only sensor is being used and
displayed
2) The humidity is outside the range of 19-95%
NOTE: For problems not solved, please contact La Crosse
Technology.
22
Hide quick links:
Advertisement
Table of Contents
