Battery Installation - La Crosse Technology WS-7032UF Instruction Manual

DETAILED SET-UP GUIDE
I.

BATTERY INSTALLATION

A. REMOTE TEMPERATURE
TRANSMITTER
1. Remove the battery cover. Place your
thumb over the two air-vent slots on the
face of the Remote
Temperature
Transmitter,
down gently,
battery cover down
and off.
2. Observing the correct polarity, install 2
AAA batteries. The batteries will fit
tightly (to avoid start-up problems make
sure that they do not spring free during
installation).
3. Replace the battery cover.
4
Battery
Cover
push
slide