(Set-Up, Viewing & Operation) Mounting - La Crosse Technology WS-7026U Instruction Manual

displayed, otherwise press the button twice) will display the
same data for the maximum recordings.
3. To reset the Minimum/Maximum readings, it is necessary to
select which Thermo Hygro Transmitter you wish to reset.
Press and hold the OUT button for 5 seconds, the records for
the selected Thermo Hygro Transmitter unit will be reset.
MOUNTING
Note: Before permanently mounting, ensure that the Indoor Temperature
Station is able to receive WWVB signals from the desired location. Also,
extreme and sudden changes in temperature will decrease the accuracy of
the weather station and changes in elevation will result with inaccurate
weather forecasting for the next 12 to 24 hours. These changes will require
a 12 to 24 hour wait before obtaining reliable data. To achieve a true
temperature reading, avoid mounting where direct sunlight can reach the
Thermo Hygro Transmitter. We recommend that you mount the Thermo
Hygro Transmitter on a North-facing wall. The sending range is 80ft—
obstacles such as walls, concrete and large metal objects can reduce the
range. Place both units in their desired location and wait approximately 10
minutes before permanently mounting to ensure that there is proper
reception. The Indoor Weather Station should display a temperature in the
OUTDOOR LCD within 4 minutes of setting up.
I. THERMO HYGRO TRANSMITTER
A. MOUNTING WITH THE SCREWS
1. Remove the mounting bracket/receptor from the packaging.
2. Place the mounting bracket over the desired mounting surface.
Through the 2 screw holes of the bracket, mark the mounting surface
with a pencil.
3. Where marked, start the screw holes using the provided screws.
Remove screws from the mounting surface.
18