How To Assemble Your Monitor Hardware - BenQ MOBIUZ EX Series User Manual

How to assemble your monitor hardware

• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
• The following illustrations are for your reference only. Available input and output jacks may vary depending
on the purchased model.
• The supported timing may vary by input signal. Download
support on page
• Avoid finger pressure on the screen surface. Finger pressure on the screen surface is prohibited. The
screen may be damaged by excessive force.
• Consider the size and the weight of the product, you need assistance from another person when
assembling or moving the monitor.
• Your monitor comes with an ultra-slimmed OLED panel and should be handled carefully. Never touch the
upper part of the panel under any circumstances. Pressure or excessive force on the screen surface is
prohibited as well.
• Be careful when handling the sharp monitor base and protect yourself from any physical harm.
1. Prepare the area.
To unbox your product, you will need a clean area of about 300 x 120 cm on the floor.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or
a mouse will crack the glass or damage the OLED substrate voiding your warranty. Sliding or scraping the
monitor around on your desk will scratch or damage the monitor surround and controls.
2. Attach the monitor base.
Open the top cover of the package. Grab the tapes to
lay the package down carefully on the floor. Make sure
it is the printing of the product's rear view facing
upwards as illustrated.
Hold the box tight from the holders at the bottoms,
and grab the tapes to take the EPE cushions and the
package contents out.
3). Refer to "
Preset display modes
Resolution file
" in for more information.
Resolution file
20
from the website (see Product