Weather Display - La Crosse Technology WS-2510 Operating Instructions Manual

not required can also be deactivated via this window, or all sensors can be
selected or deselected simultaneously, or you can use the "Reset" button after
making a selection in order to return the settings to as they were when the
window was opened.

Weather display

When weather data are being recorded, the measurement values can also be
shown in parallel to their being graphically represented, in a window that
corresponds to a weather station display. By calling up this function, you can
choose to turn the display window on or off.
You can click with the right-hand mouse button in the display in order to change
the properties of the window (see chapter 5: "Weather display") – e.g. to choose
which of the outdoor sensors is to be displayed.
The settings for the window are saved automatically, meaning that when it is
next called up, the window appears with the properties that were last selected
for it.
The display fields for the weather display are permanently allocated:
- Top left: Indoor sensor with temperature and humidity
- Top right: Selected outdoor sensor with temperature and humidity
- Bottom left: Wind direction display with wind rose, where the area of fluctuation
of the wind direction is displayed in a red colour; also wind strength display.
- Top middle: Rainfall display:
- Bottom middle: Weather forecast with weather symbols
- Bottom right: Air pressure display with trend display and 72-hour trend
40