Rainfall; Wind Strength And Wind Direction; Air Pressure; Brightness - La Crosse Technology WS-2510 Operating Instructions Manual

Rainfall

The measurement window for portraying the rainfall. The portrayal takes the
form of a clear column chart (evaluation in hours starting from half past the
hour). Here, too, the values table can be opened using the mouse.
Instead of the minimum/maximum values, you can read off the hourly and daily
rainfall values in the top part of this window.

Wind strength and wind direction

The weather data from the wind sensor are displayed as a window on the screen.
For the extreme wind speed values, the prevalent wind direction at the time of
saving is displayed in the top part of the value table together with the limits of
fluctuation.

Air pressure

Display of the barometric air pressure window in graphical and tabular form with
the corresponding minimum and maximum values.

Brightness

Display of the brightness trend over a defined period in graphical and tabular
form with the corresponding minimum and maximum values.

Hours of sunshine

Display of sunshine duration as a column diagram, provided that the threshold
value set for the sunshine duration is exceeded. The scaling is adapted as the
sunshine duration increases, and after sunset/a long cloudy period, this is shown
cumulatively for the day.
The values table, too, constantly shows the individual values obtained for
sunshine duration as well as the cumulative daily value following sunset/a long
cloudy period. In the table header, the days of minimum sunshine duration and
the maximum sunshine duration are displayed with the appropriate cumulative
values.

All sensors

All available sensor measurements (set in the sensor management) are portrayed
simultaneously.
Sensor management
After activation of this menu item, a window opens up in which all the PC weather
station's supported sensors (independent of the actual available/received
sensors) are listed. By marking the relevant selection boxes with a tick (by clicking
on the set-up field), you can manually activate any sensors you wish. Sensors
39