Table of Contents
Advertisement
2
Important Notes for Operating the Touch Screen
(Generally Applicable)
•
All actions and functions of the Weather Center begin by
slightly touching, not pressing, the Touch Screen.
•
The switchable areas appear with a star ( )٭symbol in the
bottom section of the LCD or above the corresponding
values.
•
The following selections in the bottom section of the LCD are
used to set any function, value, or unit within any mode:
٭ON ٭or ٭OFF٭ ,٭UP ٭or ٭DOWN ,٭or by directly selecting
the unit.
•
When setting any function, value, or unit, ٭NEXT ٭will
advance the screen to the next menu option; ٭EXIT ٭will exit
the menu and return to the normal display mode.
•
Every programming step activated by touching a switchable
area on the screen is acknowledged by an audible beep
when the buzzer option is switched to "ON".
•
During any menu operation, if no active area is touched for
20 seconds, the menu is automatically deactivated and the
screen will return to the normal display mode.
3
To Begin Operation
To begin it is necessary to decide whether to use AC power
(adapter included) or batteries to operate the system. Either
method will ensure a connection to the Thermo-Hygro Sensor
and Base Station by cable or by a 433 MHz wireless radio signal.
Note:
When first setting up the Weather Center, it is
important to temporarily set up the entire system in
close proximity on a table or counter top as you intend
to use the system (wired or wireless). This step serves
as a test to ensure that all components function
correctly prior to final installation.
4
Advertisement
Table of Contents
