Display Of Stored Min/Max Values And Alarm Value Settings - La Crosse Technology WS-3610-CH Operation Manual

Default Settings (Factory Reset) → Allows the reset of all
settings and/or stored values to the factory default →
Acknowledge with ‫٭‬CONFIRM‫.٭‬
Once all of the settings have been made, touch ‫٭‬EXIT‫ ٭‬to leave
the basic setup mode.
5 Display of stored Min/Max Values
and Alarm Value Settings
Upon recall, named values will display and flash in their
respective sections.
Min/Max and alarm values are recalled from the menu shown
below which must be activated by touching the Touch Screen in
the center of the text display section (last two lines at the bottom
of the LCD). Touching the *MINMAX* or *ALARMS* field will
display the corresponding values.
The Min/Max values can also be recalled individually by touching
the respective area of the display. Example: Touching the
"Indoor" section of the display will activate the menu shown
below. Min, Max, and Alarm values can then be displayed by
touching the corresponding field.
11