Table of Contents
Advertisement
Do not remove batteries or unplug the AC adaptor of the base station
otherwise all 175 sets of recorded weather history data for transferring to the
PC will be lost (for full details of PC use, please see PC user manual in the
enclosed Heavy Weather CD-ROM).
However if you wish to make a full reset of the base station and return to the
original factory settings, simultaneously press and hold the PRESSURE and
WIND keys for about 5 seconds. The base station will beep once and the
entire LCD will light up for 5 seconds and go back to the original factory
settings. This process with clear all previous user defined values and all
weather history recordings.
Factory default settings:
The following table shows the factory default values of the weather station:
Matter:
Default Setting:
Time
12:00 am
Date
01.01.2001
Time zone
-5 ET
Alarm time
12:00 am
Relative air pressure
29.91 inHg
Weather-picture threshold
0.09 inHg
LCD contrast level
5 (1-8 levels)
Rainfall per impulse
0.0204 inches
Storm alarm
0.09 inHg
Relative air pressure alarm
28.34 inHg (low)
Indoor temperature alarm
50ºF (low)
Outdoor temperature alarm
32ºF (low)
Indoor humidity alarm
35%RH (low)
Outdoor humidity alarm
45%RH (low)
Wind chill alarm
50ºF (low)
Dew point alarm
32ºF (low)
Rainfall 24h alarm
1.96 inches
Rainfall 1h alarm
0.03 inches
Wind Speed
1.0 mph (low)
Wind direction alarm
None set
Note:
All alarm default values are deactivated at the start up and any alarm must be
activated by the user otherwise it will not sound.
11.
After setting up, the following data will be displayed in different sections on the
LCD. If this is not the case please observe the notes on "Interferences"
below.
30.71 inHg
(high)
86ºF (high)
104ºF (high)
65%RH (high)
70%RH (high)
86ºF (high)
68ºF (high)
Time & Date (LCD Section 1)
If the WWVB icon (icon 2) is ON and not flashing, it means that the WWVB
62 mph (high)
radio-controlled time and date are has been received. Press the PLUS (+) key
to change the format of date display between date/month/year,
weekday/date/month, seconds, alarm set time and time zone.
Function Description of the Weather Station
LCD Section 1:
Time, date, seconds, time zone,
weather forecasting icons with
tendency arrows, air pressure,
and respective alarms sections
LCD Section 2:
Indoor and outdoor temperature and
relative humidity, wind chill, dew
point, rainfall, and respective alarms
sections
LCD Section 3:
Wind direction, wind speed, and
respective alarms sections
Advertisement
Table of Contents
