Lab.gruppen PLM Series PLM 10000Q Quick Start Manual page 10

6 QUICK sTArT TUTOrIAl
installation. For most installations, the subsequent
suggested default paths can be accepted.
Refer to section 2 of the DLC user Manual for further
details on how to install the software and configure
your computer for optimum performance.
Please note that, if pre-existing DLC presets
are present on your PC when you install the
DLC PLM Edition software, choosing a specific
installation path may be preferable. See the DLC user
Manual PLM Edition addendum for more
information.
once the software is installed, the application can be
launched by clicking the desktop icon created during
the install process in the usual way.
Full details of how to use the software application
are contained in the documents DLC user Manual
and DLC user Manual PLM Edition addendum,
both of which are supplied with the PLM. if these
documents are not available, see section 4.2 for
download links.
6.3.2 Software and firmware Updates
Both Lab.gruppen and Dolby Lake strive to improve
and update the capabilities of PLM Series products.
Many of these improvements are available to PLM
Series users as free updates of the Dolby Lake
Controller PLM Edition software application and PLM
Series firmware.
Registered users of PLM Series products will receive
timely notification of firmware updates via e-mail.
You also may check for the most recent updates
at www.labgruppen.com/index.php/support/
software_firmware/. Complete information on
firmware updates can be found in section 12.6 of
the PLM Series operation Manual.
Because of the time normally required for CD
preparation, as well as for shipment of the
unit, it is possible that the software and
firmware on the CD-RoM has been superseded by
a newer version. However, it is permissible to load
the version on the CD and then subsequently upgrade
by downloading the newest versions.
10 PLM Series Quick Start and Field Reference
6.3.3 Networked Applications
the PLM Series implements a full Ethernet stack,
and is a fully functional networked device. Control,
monitoring and digital audio (via the Dante network)
are available via the Ethernet connections. For
information on networked applications, please refer
to the PLM Series network Configuration Guide.
Guide