Table of Contents
Advertisement
Replacing the batteries
3
Replace the batteries
When removing batteries, take them out from the positive
Check the polarity of the batteries (positive
rechargeable Ni-MH AA-type batteries or two AA-type alkaline dry-cell batteries in the
battery slot according to the polarity indication ( ,
4
Place the battery cover back on
Slide the battery cover in the indicated direction to place it back on.
5
Check the status indicator
Important
Slide the power switch to the [ON] position to turn the microphone ON and check that
the status indicator lights either green or orange.
●
The charging time for Ni-MH batteries when using the dedicated charger
(WX-SZ600P) depends on the type of rechargeable batteries and the usage
conditions, but at longest it will be around ten hours.
●
Some batteries may not perform well with this product. If possible, use one
of the recommended batteries. The recommended batteries are as follows.
Rechargeable battery: BK-3MCCA Panasonic Ni-MH AA-size battery
Dry-cell batteries:
34
and negative
LR6PA Panasonic alkaline AA-size battery
LR6XE Panasonic alkaline AA-size battery
pole.
), and insert either two
).
Advertisement
Table of Contents
