Related Manuals for CyberPower CPS625AVR
Summary of Contents for CyberPower CPS625AVR
- Page 1 User Manual for CPS625AVR with USB Interface and PowerPanel™ Software ADDITIONAL INSTALLATION TIPS CAN BE FOUND AT: www.cyberpowersystems.com...
-
Page 2: Table Of Contents
Warranty………………………………..…11 LED Indicators………………………….7 Thank you for purchasing a CyberPower Systems Product. To enjoy all the features and benefits of this Uninterrup- tible Power System (UPS), please read and follow all installation and operation instructions completely. This UPS is designed to provide guaranteed power protection for connected electronic equipment. The accompanying Power- Panel™... -
Page 3: Description
The CPS625AVR features 600 Joules of surge protection, and provide long lasting battery backup with a 7.2AH battery for loss of utility power and voltage sags. The CPS625AVR ensures consistent power to your computer system and include software that will automatically save your open files and shutdown your computer system during a utility power loss. -
Page 4: Hardware Installation Guide
2. Insure that the equipment plugged into the three battery power-supplied outlets does not exceed the UPS unit’s rated capacity (625VA/325W for CPS625AVR). If rated unit capacities are ex- ceeded, an overload condition may occur and cause the UPS unit to shut down or the circuit breaker to trip. -
Page 5: Software Installation Guide
CPS625AVR Guaranteed Uninterruptible Power System 8. To maintain optimal battery charge, leave the UPS plugged into an AC outlet at all times. 9. To store your UPS for an extended period, cover it and store with the battery fully charged. Re- charge the battery every three months to insure battery life. -
Page 6: Software User Manual
When your computer restarts, the PowerPanel™ software will appear on your screen for a few seconds, and then minimize. It will appear as a blue and white battery icon located in the system tray, near the clock. FOR WINDOWS 2000 1. - Page 7 CPS625AVR Guaranteed Uninterruptible Power System 7. AC Power Indicator: This indicator appears in a green color when AC power in normal. When the power fails, the indicator will change to a red color with an “X” through it. 8. Scheduled Shutdown: If there is a shutdown scheduled within seven days, the information will be displayed here.
- Page 8 USING THE WINDOWS NT UPS SERVICE If you are running Windows NT, you may choose to use the Windows NT service instead of Power- Panel™. You can run either PowerPanel™ or the NT service, but not both. To Configure the Windows NT UPS Service: 1.
-
Page 9: Led Indicators
CPS625AVR Guaranteed Uninterruptible Power System If you are NOT using PowerPanel™: 1. Have your computer and UPS turned on. 4. Save and close any open files. 2. Unplug the UPS from the wall to simulate 5. Shut down the operating system. -
Page 10: Trouble Shooting Guide
The unit will charge in off position. Contact CyberPower Systems about The battery is worn out. replacement batteries at tech@cyberpowersystems.com Contact CyberPower Systems about at Mechanical problem. tech@cyberpowersystems.com Connect the serial cable to the UPS The serial cable is not con- unit and an open serial port on the back nected. -
Page 11: Specifications
CPS625AVR Guaranteed Uninterruptible Power System SPECIFICATIONS Model CPS625AVR General Capacity 625VA (325W) Frequency 57Hz to 63Hz Input Voltage Range 92v – 140v Line Conditioning AVR boost 10% of input voltage for output regu- Regulation lation while input voltage is below104V. -
Page 12: Battery Replacement Instructions
REPLACING THE BATTERY CAUTION! Read and follow the IMPORTANT SAFETY INSTRUCTIONS before servic- ing the battery. Service the battery under the supervision of personnel knowl- edgeable of batteries and their precautions. CAUTION! Use only the specified type of battery. See your dealer for replacement batteries. -
Page 13: Warranty
CyberPower will inspect and examine the Product within ten (10) days of receipt. If the Product is not as warranted, CyberPower will repair or replace the Product and return it to you at CyberPower’s expense, or, if CyberPower is unable to or decides not to repair or replace the Product (if defective) within a reasonable time, CyberPower will refund to you the full purchase price you paid for the Product (purchase receipt showing price paid is required). - Page 14 CyberPower. 4. Pack and ship the Product to CyberPower and, if requested by CyberPower the item(s) of Connected Equipment, a repair cost estimate for the damage to the Connected Equipment and/or a written statement of how the damage occurred, as instructed in your Return Mate- rial Authorization.
- Page 15 Power Control Guarantee does not cover damage to Connected Equipment or apply if the product has been oper- ated in a failure mode or not in compliance with CyberPower operating instructions and manuals. Or if the Con- nected Equipment has been operated in a failure mode or not in compliance with the instruction and manuals of its manufacturer/vendor.
- Page 16 Contact Information: CyberPower’s address is 5555 12 Ave East, Suite 110, Shakopee, MN 55379 and its phone number is (952) 403-9500. CyberPower is the warrantor under this Limited Warranty. You may also contact Cyber- Power on the Internet at www.cyberpowersystems.com.
- Page 17 Tel: (952) 403-9500 Fax: (952) 403-0009 Email: sales@cyberpowersystems.com Web: www.cyberpowersystems.com Entire contents copyright ©2003 CyberPower Systems, Inc. All rights reserved. Reproduction in whole or in part without permission is prohibited. PowerPanel™ is a trademark of CyberPower Systems (USA), Inc. REV.625001...