Table of Contents
Advertisement
The identification size may have errors due to different shapes of the object.
In the following cases, the motion detection and the image analysis alarm performance
may be reduced or abnormal operation may occur.
The brightness or color of object may be similar to the background of image
-
The position of image frame may move slightly
-
Most motions occur continuously and randomly due to the influence of factors such as lens
-
switching and rapid change of lighting
The motion of fixed object on the same position occurs continuously
-
Just like the object is close to the camera or keeps away from the camera, the position on the
-
image may move slightly
The moving object approaches to the camera
-
Any object shields the objects different from each other
-
More than two objects combine or one object is separated into multiple
-
The motion of object is too fast (same objects have overlapping area between continuous
-
frameworks)
Reflection, exhaust dyeing and shades occur due to strong light rays, such as direct light,
-
lighting and automotive headlamp
Bad weather like snow, rain and wind or sunset/sunrise
-
7. Exit (MAIN MENU→Exit)
SAVE&END: Menu for current setting and exiting "main menu".
NOT SAVE: Not save current setting and exiting "main menu".
RESET: Restore the camera to the factory defaults. But the language and mode setting will not
restore defaults.
Notes:
Item with icon
includes submenu. You can go to the sub menu and do the settings.
The item with - - - icon is not available due to function setting.
27
Advertisement
Table of Contents
