Table of Contents
Advertisement
WHITE BAL: MAIN MENU→WHITE BAL (ATW/AWC→SET/INDOOR/OUTDOOR/MANUAL/AWB)
1.EXPOSURE
2.BACKLIGHT
3.WHITE BAL
4.NR
5.SPECIAL
6.ADJUST
7.EXIT
ATW: When the color temperature is between 1,800K° and 10,500K°, set as ATW.
AWC→SET: Set the white balance manually according to the current color temperature.
INDOOR: When the color temperature is between 4,500K° and 8,500K°, set as INDOOR.
Adjust the white balance to optimize the color of camera in the indoor environment.
OUTDOOR: The color temperature is between 1,800K°~10,500K°. (Including sodium lamp) To
enable the camera to restore the original color correctly in the outdoor environment,
the white balance shall be adjusted.
MANUAL: choose MANUAL to adjust the white balance manually.
1.BLUE
2.RED
3.RETURN
BLUE: 0-100 (optional). The larger the value, the bluer the image.
RED: 0-100 (optional). The larger the value, the redder the image.
RETURN: RET/SAVE&END
AWB: Back to normal color under special scenario, such as under tungsten filament lamp, or
fluorescent lamp.
In this case, "white balance" cannot work normally.
MAIN MENU
OFF
ATW
SAVE&END
MANUAL WB
........|........50
........|........50
RET
21
Advertisement
Table of Contents
