Advertisement
OPERATING AND
PROGRAMMING
INSTRUCTIONS
SPECIAL
PROGRAMMING
March 2006
Due to the lower temperature settings, this unit has been de
signed to hold NON-POTENTIALLY HAZARDOUS FOOD
ONLY. This unit will NOT hold potentially hazardous food at
a safe temperature
1. Turn power switch to the ON position.
2. After a sequence of codes the display shows the time
of day, or "ON".
Press and hold the TEMP button to view the actual
temperature of the unit.
Temperature Setpoint Programming
1. Press and hold the TEMP button for 6 seconds. The actual
temperature shows first followed by the flashing setpoint
temperature.
2. While holding in on the TEMP button, press and release
the SET button. Now the setpoint temperature blinks at a
faster rate. Now release the TEMP button.
3. Press the UP and DOWN buttons to change the setpoint
temperature.
4. Once the desired setpoint temperature (preprogrammed
maximum temperature) is reached, press the SET button to
return to normal operation mode and the setpoint is saved.
"Time of Day" Programming
Press and hold the SET button while using the UP and DO
buttons to set the desired time. When the SET button is re
leased, the time is saved.
1. With POWER switch off, press and hold both the UP and
DOWN buttons, and then turn the POWER switch on until "SP"
shows on the display. Release the UP and DOWN buttons, and
"
F" or "
C" shows on the display.
o
o
2. Press the UP or DOWN buttons to toggle from "
or "
C" (Celsius) to "
o
5
Model BW-100/BW-4/BW-4/3/BW-6/BW-8
F" (Fahrenheit).
o
F" to "
C",
o
o
Advertisement
