The Configuration For Voip; Sip Settings - Zoom Realtek Series User Manual

11 The Configuration for VoIP

11.1 SIP Settings

Firstly, login onu's web and configure a WAN connection to carry Voice service
according to #6.1 or 6.2 and select "VOICE" or "VOICE_INTERNET" or "VOICE_TR069" or
"VOICE_INTERNET_TR069"in Service List.
Then select Voip Settings->PORT 1(the operation of Port 2 is the same as Port 1), and
then there are some parameters for us to configure as follows:
【Display name】Fill in the Auth User name that can register to the voice server.
【Number】Fill in the telephone number.
【Login ID】ID for registration and authentication.
【Password】Fill in the password that can register to the voice server.
【Proxy】Check enable,enable this phone number.
【Register Server】Fill in the Register Server's ip address.
23