Horn Button; Light Switch (Optional) - Jacobsen Ransomes HM600 Quick Start Manual

Ride on flail mower

Hide thumbs Also See for Ransomes HM600:

Table of Contents

HORN BUTTON

For machines without the lighting kit.

The horn button (A) is on the control panel. If

the lighting kit is fitted, the horn is found on

the end of the indicator stalk.

CUTTER SWITCH

This switch engages the cutter blade

rotation.

To cut grass, push the front of the switch and

move the joysticks forward to lower the

decks. When engaged the yellow LED on the

pod is illuminated.

To stop the blade, push the rear of the rocker

switch.

When lifted out of work or the operator

leaves the seat, blade rotation is stopped.

QUICK START GUIDE

4 WHEEL DRIVE IN REVERSE SWITCH

Engages the four wheel drive while the

vehicle is in reverse. The switch must be

held to engage.

Allows manual operation of the road lights.

Position 1. OFF

Position 2. Side / Marker Lights

Position 3. Main Beam.

Note: Position 3 - Will not activate with

the ignition turned OFF.

CONTROLS

en-9

Table of Contents