Warning Battery Fault - Jacobsen Ransomes HM600 Quick Start Manual

When the reversing fan has been manually
activated, both the cutter indicator and fuel
pump icon will change to the fan icon.
When the button is released the cutter
indicator will replace the fan icon. When the
cycle has been completed the fuel pump
indicator will replace the fan icon.
NOTICE
Once a manual fan reverse cycle has
been requested there is a 60 second
delay before it can be activated
again.
WARNING ENGINE FAULT
When this screen is shown, there is an
engine fault.Stop the engine as soon as
possible and contact your local Ransomes
Jacobsen Dealer
When this fault occurs the machine go's into
limp-home mode.
The number in the top right of the screen
indicates the total number of faults recorded.
Press the button below the
fault.
1

to confirm the
QUICK START GUIDE
VISUAL DISPLAY
WARNING FOOT PEDAL FAULT
When this screen is shown if there is a
communications fault between the foot pedal
and the controller.
Stop the machine as soon as possible and
contact your local Ransomes Jacobsen
Dealer
When this fault occurs the machine go's into
limp-home mode.
The number in the top right of the screen
indicates the total number of faults recorded.
Press the button below the
fault

WARNING BATTERY FAULT

When this screen is shown, the battery is not
charging or there is a charge circuit fault.
The number in the top right of the screen
indicates the total number of faults recorded.
Press the button below the
fault.
1

to confirm the
1

to confirm the
en-17