Installation Clearances; Washer Dimensions; Level Floor; Minimum Installation Spacing For Recessed Area Installation - LG WM2077C Owner's Manual

INSTALLATION INSTRUCTIONS

■ Installation clearances

The location must be large enough to fully open
the washer door.

■ Washer dimensions

• Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
Minimum installation spacing for
■
recessed area installation.
The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required for wall,
door and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of
the washer is recommended to reduce noise
transfer.
Companion appliance spacing should also be
considered.
6
38 11 / 16 "
(98.3 cm)

■ Level floor

• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the washer
• Wood floors may need to be reinforced to
• Carpeting and soft tile surfaces are not
• Never install the washer on a platform or weakly

■ Power outlet

Must be within 60 in. (1.5 m) of either side of the
washer. Do not overload the outlet with more than
one appliance.
3
29 / "
4
(75.6 cm)
(10 cm)
[Side view]
1" 27"
(2.5 cm)
(68.6 cm)
[Front view]
MUST be installed on a solidly constructed
floor.
reduce noise and vibration.
recommended.
supported structure.
4"
1"
(2.5 cm)