Clifford XL4000 Owner's Manual page 6

Standard Features of the XL4000
Remotely Adjustable Dual-Zone Piezo Sensor™
remote, you may, at any time or place, adjust and test the sensitivity of
this microprocessor-controlled solid-state sensor. The two sensor zones
provide full perimeter protection: If someone bumps into your car, the
system will sound a distinctive warning tone; if forced entry is detected,
the full alarm will sound.
Audible Confirmation of Sensor Adjustments
each incremental increase and a single chirp for each incremental
decrease in sensitivity.
Unprecedented Reliability
wear out and the entire electronic circuitry resides in the passenger
compartment, not in the engine well where it would be exposed to
temperature extremes, water, vibration and dirt.
Adjust and Test Unobtrusively
and no siren wailing. You set and test sensitivity without activating the
alarm!
Dual-Mode "Chirp" Silencing
the siren "chirps" and the parking lights flash to confirm system status.
Whenever you wish, you may silence the chirps with either of these two
methods:
Remote Controlled Chirp Muting
button 3 will arm and disarm the system silently. It's perfect when
parking at night in a quiet residential area.
Long-Term Chirp Silencing
chirps until you choose to reactivate them.
Remote Controlled Courtesy Lighting
convenience, when you remotely disarm your XL4000, the interior lights
turn on and stay on until you start the engine or 30 seconds, whichever
occurs first.
Built-In Parking Light Flasher
status.
— With just a touch on the
— Issues two chirps for
— There are no moving mechanical parts to
— No repeated arming and disarming,
—Whenever you remotely arm or disarm,
—Just a press of remote control
—A few flicks of a switch silences the
—For your personal safety and
—Visually confirms door lock and system
4
(cont.)