10. Installation
16 Setting Fan mode
Press Mode button to be change to Fan mode in the OFF status.
17 Setting SEG21, SEG22 option
a Press Low Fan button( ) to enter SEG21 value.
b Press High Fan button( ) to enter SEG22 value.
Each time you press the button,
18 Setting Heat mode
Press Mode button to be change to Heat mode in the OFF status.
19 Setting SEG23, SEG24 mode
a Press Low Fan button( ) to enter SEG23 value.
b Press High Fan button( ) to enter SEG2 4 value.
Each time you press the button,
5 After setting option, press
▶
▶
6 Press operation button
twice.
7 Check operation.
a Reset the indoor unit by pressing the RESET button of indoor unit or outdoor unit.
b Take the batteries out of the remote control and insert them again and then press the operation button.
Option setting
will be selected in rotation.
will be selected in rotation.
button to check whether the option code you input is correct or not.
▶
▶
with the direction of remote control for set. For the correct option setting, you must input the option
SEG21
SEG23
▶
▶
Status
SEG22
SEG24
▶
▶
▶
23