Adding New Remote Controls; How To Erase The Codes Of Lost Or Stolen Remote Controls - Clifford SuperNova II Owner's Manual

Adding new remote controls

For other drivers in your family, or if you wish to control Clifford systems on your
other cars with the same remote control, you can buy additional remote controls
from any Clifford Dealer (or call our Customer Service Department at
800-824-3208) and program them into the system yourself. Each SuperNova II will
respond to as many as four 3-channel ACG and/or 12-channel ACG remote
controls. To add a new remote control to the system, use the procedures noted in the
User-selectable features section on pages 17-18.

How to erase the codes of lost or stolen remote controls

If one of your remote controls is ever lost or stolen, you can erase its digital codes
from the system memory to make sure that the missing remote control can never be
used to disarm your system. To do so, use the "Erase all channels" feature (see
User-selectable features on pages 17-18). This will clear all remote control codes
from the system memory. Then simply program each remaining and/or replacement
remote control as noted in the Adding new remote controls section above.
one or more of the following Clifford Electronics patents:
4,158,874; 4,233,642; 4,327,444; 4,383,242; 4,430,685; 4,845,464;
4,887,064; 4,890,108; 4,922,224; 4,997,053; 5,081,667; 5,146,215;
5,157,375; 5,467,070 and other patents.
For a Clifford Dealer near you, call 1-800-CLIFFORD or visit our Internet Website at
© Copyright Clifford Electronics, Inc., 1996
SuperNova II is covered by
http://www.clifford.com
31-702C/SN2OM/696